Roku Music Player - Manual (Page 87)

Example 4: Netgear WG602
The Netgear WG602 is an 802.11g Wireless Access Point. Its configuration can be accessed with a web
browser. First, open a web browser and connect to the access point by entering the access point’s IP
address in the location bar of your web browser. If you do not know the IP address of the access point,
please refer to the software or manual that came with the access point in order to determine the IP
address. After successfully logging in, you will see a page similar to the following:
::
The value of “Wireless Network Name (SSID)” is the SSID that you will enter into the SoundBridge’s
wireless setup. Next, click on “Security Settings” on the left side to access the WEP settings: