RCA MACINTOSH CDS1000 - Manual (Page 10)

First Things First
6
Using AC Adapter
To power the camera from an electrical
outlet, use the supplied AC adapter. To
attach the adapter to your digital camera:
1. Open the camera’s connector cover by
inserting a thumbnail under the latch and
pulling it out.
AC Adapter jack
2. Plug in the Adapter Jack.
DC IN 7V
+ _
Important Notes!
• Be sure to use the supplied AC adapter only. Using any other AC
adapter may cause damage to the camera, voiding the warranty.
• When unplugging the AC Adapter from the wall socket, be sure to grasp
the plug (not the cord).
• Avoid undue bending, pulling, or twisting of the AC adapter cord.
• If the power cord should become damaged (exposed wires, disconnection,
etc.), please contact the store to purchase a new AC adapter. Use of a
damaged power cord may cause fire or electrical shock.
• Be sure to power off your camera before connecting or disconnecting
the adapter.
• The AC adapter may become warm to the touch after extended periods
of use. This is normal and is not cause for alarm.
The supplied AC adapter will allow the
digital camera to operate without batteries