RCA MACINTOSH CDS1000 - Manual (Page 36)

References
32
Select None of the Images
Using this button to select none of the
images.
Take a Picture
Use this button to take a picture with
your camera from the computer.
Note: If Self-timer is activated, the
camera will use this timing before
taking a picture. The TWAIN driver will
get a new photo from camera and
display it in the interface window.
Get Image(s)
Use this button to get an image from the
TWAIN interface to the graphic-editing
application.
Note: You must select one or more
image files from the TWAIN interface.
The photos will then display on the
graphic-editing application.
Upload Image(s)
Use this button to upload an image from
the computer to the TWAIN interface.
Note: Click the “Upload” button, then a
file open dialog box will appear. Select
one or more files. The TWAIN driver
will then send the image(s) to the
camera. If the file format is not
supported, the TWAIN driver will
display a warning message. When the
image has been sent, the TWAIN driver
will download the new photo from the
camera and display it on TWAIN driver
window.
Download Image(s)
Use this button to download an image
from the TWAIN interface to a disk.
Note: One or more image file(s) from
must be selected from the TWAIN
driver. A file dialog will appear asking
where images should be saved. Enter
the file name (only three-prefix-letters)
and the initial number in the file dialog.
Finally, click the “Save” button.
Erase Image(s)
Use this button to erase selected images.
Note: If all images in the TWAIN
interface are selected, they will all be
deleted at the same time.
Rotate Image(s)
Use this button to rotate selected images
90
° clockwise.
Selecting Images
Select images one by on
Press Control Key (Command key on
the Macintosh) and click thumbnails to
toggle the selection.