RCA MACINTOSH CDS1000 - Manual (Page 34)

References
30
Connect the camera to the computer
Now that there are images on the camera, you can connect it
to the computer and “upload” the data to the TWAIN driver
software.
Make sure that the proper serial cable is used to connect the
camera to the proper COM port (Macintosh users connect to
an ADB serial port such as that used for external modems or
printers).
DIGITAL
COM PORT
COMPUTER
Once the camera is correctly attached to the computer and the
supplied software is properly installed, launch the image-
editing application first. Then, select “GET Pictures” from the
editing software.
Once you have selected GET PICTURES, you will be offered
a variety of choices. Choose DIGITAL CAMERA.