Raymarine A65 - Manual (Page 49)

Chapter 3: Working with Waypoints 49
3.3 Navigating to a Waypoint (GOTO)
You can navigate to an existing waypoint using the GOTO WAYPOINT OPTIONS
soft key. This can either be accessed by selecting the desired waypoint on screen
with the cursor or via the WPTS/MOB key.
... using the cursor
1. On the chart screen, move the cursor over the waypoint you wish to go to. The
cursor changes color and the Waypoint soft keys appear.
2. Press GOTO WAYPOINT.
... via the WPTS/MOB key
1. Press WPTS/MOB.
—or—
Press the GOTO soft key from the default chart screen.
2. Press GOTO WAYPOINT OPTIONS. The Waypoint List is displayed.
3. Using the trackpad (up/down) or rotary knob, highlight the waypoint you wish
to navigate to.
4. Press the GOTO soft key.
• A dashed Bearing from Origin to Destination (BOD) line is drawn between
the vessel’s original position and the waypoint. This line remains
unchanged as the boat moves.
• As the boat’s actual course varies from the original, a blue Bearing from
Vessel to Destination (BVD) line is drawn between your current position
and the waypoint. This line is updated as the boat approaches the way-
point.
GOTO
WAYPOINT
D8073-1
WPTS
MOB
D8080-1
GOTO WAYPOINT
OPTIONS
GOTO
or