Raymarine A65 - Manual (Page 74)

74 A65 GPS Chartplotter
4. Continue entering new waypoints until your route is complete.
5. To save the route for later use (and rename it if desired):
Press SAVE ROUTE or ENTER. The Edit Route dialog box is displayed. Press
ENTER to accept the defaults. You can edit the route (see page 79).
—
or —
To save and immediately follow the built route:
Press FOLLOW QUICK ROUTE. The route is saved under the name ‘Quick
Route’. If a Quick Route already exists it is overwritten. The system then ini-
tiates a follow route.
Note: If you want to keep the Quick Route, you will need to rename it. See “Changing the
Name or Color of a Route“ on page 85.
... using existing waypoints
You can use waypoints that already exist, to build a new route.
A
6.0nm North-Up (Relative Motion)
Csr Pos N 50°45.914 W 001°31.743 252°T 26.74nm
WPT 0001
D8129
-2
WPT 0002
WPT 0003
WPT 0004
SAVE ROUTE
FOLLOW
QUICK ROUTE
PLACE
WAYPOINT
USE WPT
LIST
UNDO
WAYPOINT
SAVE ROUTE
FOLLOW
QUICK ROUTE
PLACE
WAYPOINT
USE WPT
LIST
UNDO
WAYPOINT
ROUTES
D8096-1
USE THIS
WAYPOINT
NEW ROUTE