Raymarine A65 - Manual (Page 81)

Chapter 4: Using the Chartplotter 81
‘
4. Use the trackpad (right) to move control from the left (Waypoint) column to
the right (New Route) column.
5. Use the trackpad (up) to move the highlight immediately below where you
want the new waypoint inserted. The route follows the waypoints listed in this
column in order, from top to bottom.
‘
6. Move control back to the left column and select the waypoint that is to be
added to your route.
‘
7. Press INSERT WAYPOINT. The waypoint is added.
Make Route Make Route
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013 WPT 0008
WPT 0009
WPT 0011
N 25°34.521
W 079°01.755
D8123-2
Waypoints in this route
All existing waypoints
Trackpad controls field
highlighted in cyan
D8124-2
Make Route Make Route
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013 WPT 0008
WPT 0009
WPT 0011
N 25°34.521
W 079°01.755 N 25°33.055
W 079°56.151
ENTER
ENTER
then
Make Route Make Route
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013 WPT 0008
WPT 0009
WPT 0011
N 25°28.205
W 079°39.759 N 25°33.055
W 079°56.151
D9046-2
ENTER
ENTER
then