6 controlling how waypoints are displayed – Raymarine A65 User Manual
Page 60
60
A65 GPS Chartplotter
CAUTION: Erasing a Waypoint used in a Route
It is possible to erase waypoints that are used in routes. In such
instances, the stored route will join the two waypoints on either
side of the waypoint just erased. Ensure that this altered route
does not present a navigation hazard.
3.6 Controlling How Waypoints are Displayed
When you have placed many waypoints on your system, it may become difficult to
easily interpret chart information. This is particularly the case if you have many
waypoints in a small area.
To designate whether all waypoints or their names are displayed:
1. Press PRESENTATION from the main chart screen.
2. Press the SHOW/HIDE WAYPOINTS soft key.
3. Toggle WAYPOINTS between SHOW or HIDE.
4. Toggle WAYPOINT NAME between ON or OFF.
D8110-1
SHOW/HIDE
WAYPOINTS...
PRESENTATION...