RCA CDS6300 - Manual (Page 35)

Using the Camera’s Features
Chapter 2 33
FLASH
TIMER
MODE ON
S ET UP
V IE W
OFF
Power dial
MENU
QUICK REVIEW
DISPLAY
Navigation
button
TV Signal
You can set the video output signal to NTSC or PAL,
depending on the type of signal you have in your
area. The default is NTSC, but PAL may be necessary
in some countries.
1. Set the Power dial to SETUP. (The Setup menu
appears and LCD BRIGHT is highlighted.)
2. Use the Navigation button to scroll to TV.
3. Use the Navigation button arrows to adjust the
type of signal. The on-screen arrows indicate
which arrows you can use on the Navigation
button.
4. When finished, use the Navigation button to
scroll to the next setting or set the Power dial to
the desired mode.
Language
The menu languages can be displayed in English,
French, German, Spanish, and Portuguese.
1. Set the Power dial to SETUP. (The Setup menu
appears and LCD BRIGHT is highlighted.)
2. Use the Navigation button to scroll to
LANGUAGE.
3. Use the Navigation button arrows to adjust the
display language. The on-screen arrows indicate
which arrows you can use on the Navigation
button.
4. When finished, use the Navigation button to
scroll to the next setting or set the Power dial to
the desired mode.