Rhino Mounts RHD88 - Manual (Page 132)

MAINTENANCE
RHD 02/11 Maintenance Section 5-2
© 2011 Alamo Group Inc.
MAINTENANCE
Maintenance Instructions
Before operating the mower, make sure it is properly lubricated and thoroughly inspected. Only a minimum of
time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free
operation.
Check all bolt tightness BEFORE initial operation of the mower. Retorque all hardware after the first 4 hours of
operation. A torque chart is provided at the end of the Maintenance Section.
NOTE: Before initial start-up, check outer cuttershaft bearing setscrews. Standard 3/16 allen wrench must be
modified as shown.
This modified tool allows access between housing
and bearing inner race to tighten setscrews. Check
setscrews after first days of operation. If loose,
tighten and recheck again the next day or until
setscrews are found to remain tight.