Roland JUNO-D - Manual (Page 37)

37
Using the Rhythm Guide
Quick Start
Switching sounds
fig.q06-22
1. Play the rhythm pattern.
2. Press [PART SELECT] so it is lit.
3. Press [0] so it is lit to select a rhythm set.
4. Use VALUE [-]/[+] to select the rhythm set that you want to use with the
rhythm pattern.
Change the tempo
fig.q06-22
When you have selected a rhythm pattern, you can specify the tempo.
1. Press [TAP TEMPO] so it is lit.
The current tempo of the pattern will be displayed.
fig.q06-02_40
2. Use VALUE [-] to adjust the tempo.
3. Press [EXIT] to return to the previous screen.
Pressing a button to modify the tempo (Tap Tempo)
You can modify the tempo by the rate at which you press [TAP TEMPO].
1. At quarter-note beats, press [TAP TEMPO] three or more times at the
desired tempo.
The tempo will be calculated automatically, and set to the interval at which you
pressed the button.
The button lets you check the tempo and time signature. During the playback of the
rhythm pattern, the button will blink in red on the first beat of each measure, and in
green on subsequent beats.
2 3 3
1 2 3
BPM stands for Beats Per
Minute, and indicates the
number of quarter notes
that occur in one minute.
JUNO-D_e.book 37 ページ ２００４年６月１１日 金曜日 午後１時２１分