Roland JUNO-D - Manual (Page 52)

52
Creating a rhythm set (Patch mode)
The JUNO-D provides rhythm sets that are suitable for a variety of
musical genres. You can edit a preset rhythm set to modify the
pitch/volume/panning of each percussion instrument sound to
your liking, and save it as a
user rhythm set .
How to make the rhythm set
settings
A rhythm set consists of the following types of settings.
• Settings used by the entire rhythm set (Rhythm Common)
• Settings for each rhythm tone (key) (Rhythm Tone)
Collectively, these are referred to as “ rhythm set parameters .”
Editing the rhythm set parameters
1. Press [PATCH] so it is lit and you are in Patch mode.
2. Select a rhythm set (p. 22).
fig.r04-03_40
3. Press [PARAM] so it is lit.
Now you can edit the rhythm set parameters.
Use PAGE/CURSOR [ ]/[ ] to select the parameter that
you want to edit.
4. If there is an editable parameter, the cursor (underline) will
blink below its value. Now you can use VALUE [-]/[+] to
modify the value of that patch parameter.
fig.r04-04.e
Selecting rhythm set parameters
fig.r04-05
Making settings that apply to the
entire rhythm set (Rhythm Common
parameters)
You can edit the following Rhythm Common parameters.
Name (Rhythm Set Name)
You can change the name of the rhythm set.
Here you can use PAGE/CURSOR [ ]/[ ] to move through the
characters, and use VALUE [-]/[+] to finalize the desired character.
Value: space, A–Z, a–z, 0–9, ! “ # $ % & ‘ ( ) * + , - . / : ; < = >
? @ [ ¥ ] ^ _ ` { | }
For further information, refer to “Assigning a name” (p. 43).
Editing the settings of each rhythm
tone (key) (Rhythm Tone parameters)
A rhythm set assigns a different instrument to each key. For each of
these instrumental sounds, you can edit the following parameters.
Press a key to select the rhythm tone that you want to edit.
fig.r04-06
Pitch
Adjusts the pitch of the percussive sound in semitone steps.
VALUE: -60–+67
Level
Specifies the volume of the percussive sound.
VALUE: 0–127
Pan
Sets the pan position (stereo location) of each percussive sound
when stereo output is used. With an increase in the value for L, more
of the sound will be heard as coming from the left side. Similarly,
more of the sound will originate at the right if the value of R is
increased.
When set to RND (RANDOM), you obtain a specialized effect whereby
the sound randomly moves left and right with each press of a key.
VALUE: RND, L63–0–63R
cursor
RHYTHM COMMON
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
PAGE/
CURSOR [ ] PAGE/
CURSOR [ ]
[SHIFT]
+
PAGE/
CURSOR [ ]
[SHIFT]
+
PAGE/
CURSOR [ ]
RHYTHM TONE
JUNO-D_e.book 52 ページ ２００４年６月１１日 金曜日 午後１時２１分