Roberts Radio 63I - Manual (Page 100)

99
Disabling alarms
1. To disable a single alarm enter the alarm setup menu (see page 96) and
press the Menu Up or Down buttons until the desired alarm is highlighted
on the display. Press the Select button.
2. Press the Menu Up or Down buttons until the 'Enable:' option is highlighted
on the display. Press the Select button.
3. Press the Menu Up or Down buttons to highlight 'Off' and press the Select
button.
4. Press the Menu Up or Down buttons until the 'Save' option is highlighted
on the display then press the Select button to save the new setting.
The chosen alarm will now be disabled.
Controlling alarms in standby
When your radio is in standby the alarms can be controlled using the Alarm
button. This avoids the risk of disturbance to someone who is asleep.
1. To change the states of the alarms when in standby press the Alarm button.
The display will cycle through none, either and both alarms enabled.
Snooze timer
1. The buzzer or radio alarm can be silenced for 5 minutes by pressing the
Alarm button. Should you wish for a longer snooze duration this can be
extended. Pressing the Alarm button again while the radio is snoozed will
set the available snooze time to 5, 10, 15 or 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown next
to the fl ashing alarm icon on the clock display.
3. In order to cancel the Snooze timer while the alarm is suspended, press
the On/Standby button. The display will briefl y show an 'Alarm Off'
message.
1-4 1-4
1-4
3
1
1