Roberts Radio 63I - Manual (Page 69)

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri) 68
Scan setting
When using the FM mode your radio can be set to either scan local stations
or to scan all stations including distant radio stations.
1. Press the Radio button as needed to select FM radio mode.
2. Press and hold the Menu button to enter the FM menu.
3. Press the Menu Up or Down buttons until 'Scan setting' is highlighted
and then press the Select button to enter the scan adjustment
mode.
The current scan setting is indicated with an asterisk.
4. To set your radio so that only the stations with the strongest signals
are found during scanning press the Menu Up or Down buttons until
'YES' is highlighted. Press the Select button to confi rm the setting.
(Normally this will restrict scanning to local transmissions.)
Alternatively, to set your radio so that all available stations are found
during scanning (local and distant transmissions) press the Menu Up
or Down buttons until 'NO' is highlighted. Press the Select button to
confi rm the setting.
5. Press and hold the Menu button to return to the normal FM mode
display.
FM Radio
2,5
1
3,4
3,4 3,4