Dab radio – Roberts Radio 63I User Manual
Page 61
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
60
DAB Radio
Finding new DAB radio stations
Should you wish to use your radio for DAB reception in a new location,
or if no stations were detected during the initial scan, you can follow this
procedure to allow your radio to fi nd out which DAB radio stations are
available.
1. Ensure that the telescopic antenna is extended, and then press the
Radio button as needed to select DAB radio mode.
2. Once
in
DAB
mode
press and hold the Menu button.
3. Press
the
Menu Up or Down buttons until 'Full scan' is highlighted on
the display.
4. Press
the
Select button to initiate the scan. The display will show
'Scanning' and your radio will perform a scan of the DAB Band III
frequencies. As new stations are found the station counter will increase
and stations will be added to the list. The bar graph indicates the
progress of the scan.
5. Alternativley press the Auto button on the remote control to initiate a
scan of the DAB Band III frequencies.
The Auto button may not operate in all display modes. In this case
use the menu option above.
2
1
4
3
3
5