Rimage 360i - Manual (Page 15)

Operate the Rimage 360i
Select your printing preferences
Printing Preferences allows you to set up and run your Rimage 360i to produce the best possible
label on your discs.
#
Tip: For additional
information about these
features, access the
online help in Printing
Preferences.
Through Printing Preferences, you can:
• Set the print quality
• Adjust the ink volume used
• Change or enable masking
• Printing on hub with a stacking ring
• Printing on hub without a stacking ring
• Center the image on the disc
• Check the ink levels
• Add, edit, or delete a watermark
• Set up color options
• Align the ink cartridges
Navigating to Printing Preferences
You must access the Disc Color 360i Printing Properties window to set up your printing
preferences. Use either procedure below to navigate to the Disc Color 360i Printing Properties
window.
Accessing Printing Preferences through Windows Start menu
1. From the Windows Start menu:
• In Windows 2000, navigate: Settings > Printers.
• In Windows XP, navigate: Settings > Printers and Faxes.
2. Right-click on the Disc Color 360i and select Printing Preferences from the drop-down
menu. The Disc Color 360i Printing Properties window opens.
Accessing Printer Preferences through CD Designer

Note: Properties set in the label file will override the printer driver settings.
1. In CD Designer, open a label file.
2. From the File menu, select Print. The Print window opens.
3. From the Printer Name drop-down list, select Disc Color 360i.
4. Select the Document Properties button. The Disc Color 360i Properties window opens.
110808_C 9