Rimage 360i - Manual (Page 8)

Rimage 360i
2 110808_C
Label design requirements
The Rimage 360i Software includes a label editor called CD Designer
™, which is installed on
your system. You can use CD Designer to design your labels.
If you have another software application that you prefer, you can create a label and save it as an
Acrobat
® (.pdf) file, a .jpg file, or a .tiff file.
-
Important! Only the Acrobat (.pdf) file can print directly to the Rimage 360i. To create a label
with another software application, use the following criteria:
• Color Depth – Save the artwork for the label with the color set to at least 256 colors. A color
setting higher than 256 colors is recommended.
• DPI – Use pictures or logos set to 300 DPI (dots per inch).
• Label Design Size – A standard disc is 120mm (4.723”). The hole is 15mm (0.59”). The
printable area and hub sizes vary depending on the disc manufacturer.
• Media – The media that is in Rimage Media Kits™ has a hub area of 23 mm and a printable
area of 118 mm. On most labels, print settings of 24 mm and 118 mm are recommended.