Error message – Roland BOSS DIGITAL RECORDER MICRO BR User Manual
Page 119
119
Section 8
Error Message
If you attempt an incorrect operation or if an
operation could not be executed, the display will
indicate an error message.
Refer to this list and take the appropriate action.
Cannot Edit! This is a Preset
Cause:
Preset Rhythm Arrangement is
selected; you cannot edit this data.
Solution:
Copy to the song rhythm
arrangement and then edit that.
Cannot Erase!
Cause:
No further steps can be erase.
Solution:
If only step 1 remains, no further
steps can be erased.
Cannot Insert!
Cause:
No further steps can be insert.
Solution:
You can arrange sequences of up to 50
steps.
Cannot Undo!
Cause:
You have tried to operate the
undo function though there was
no history of edit operations.
Solution:
Cannot use the undo function.
Cannot Program! Rhythm Off.
Cause:
The Rhythm is switched off, so
you cannot program it.
Solution:
Press [RHYTHM] to select Arrange
mode or Pattern mode.
Card Full!
Cause:
It is not possible to record or copy
due to small memory capacity.
Solution1:
Perform the Song Optimize
operation (p. 59).
Solution2:
Back up the data you need to your
computer (p. 100) (p. 103), and
delete unneeded data.
Card Locked!
Cause:
You are attempting to write data
to a memory card that has locked.
Solution 1:
Turn off the MICRO BR, eject the
memory card, then Lock switch to
Card Read Error!
Cause:
Memory card data cannot be
loaded correctly.
Solution 1:
Turn off the MICRO BR, properly
insert the memory card, then turn
the MICRO BR back on.
Solution 2:
* If the same message appears after you have taken the
above steps, it is possible that the memory card is
malfunctioning.
Card Write Error!
Cause:
An error occurred while writing
data to the memory card.
Solution:
The memory card must be
initialized (p. 110). Also, the song
data you had been attempting to
save will be lost.
Data Too Short!
Cause:
You have attempted to import a
MP3/WAV file shorter than one
second.
Solution:
Make sure the MP3/WAV file to be
loaded is at least one second in
length.
Drive Busy!
Cause:
If this message appears after you
have been using the memory card
with the MICRO BR, the data on
the card has become fragmented,
causing delays in reading and
writing data.
Or, you could be using memory
card with a slow processing
speed.
* In cases of unfavorable disc access conditions, such as
when track editing, punch-in/out recording, etc. is used
to connect phrases (musical data) of several seconds.
Solution 1:
Reduce the number of tracks that
are played back simultaneously.
Use track bouncing etc. to combine
tracks, or erase data from tracks
which you do not need to playback,
Error Message
MICRO-BR_e1.book 119 ページ ２００６年８月１日 火曜日 午後１２時６分