Roland BOSS DIGITAL RECORDER MICRO BR - Manual (Page 41)

41
Section 1. Recording and playing back
Section 1
1. Press
The Rec Track screen will appear. In this
time, will blink, and the MICRO BR
will be in recording standby condition.
fig.Disp-INPUT-LEVEL2.eps
2. Press the [TR1]–[TR4] button of the track
you want to record.
The indication will appear for the
track you choose.
Selecting stereo tracks for
recording
If INPUT is set to GTR (guitar) or MIC
(onboard mic)
If you want to record in stereo so that the insert
effects will sound better, you can simultaneously
press [TR1] and [TR2] or [TR3] and [TR4] to
specify stereo recording using two tracks.
fig.Disp-INPUT-LEVEL2.eps
Stereo link will be enabled (or disabled) for
the pair of tracks you pressed simultaneously.
If INPUT is set to LIN (line) or EXT
(external mic)
Since the input is stereo, this will normally be
stereo recording using two tracks. If you press
TRACK button [1] or [2], recording will take
place in stereo on tracks 1 and 2. Similarly if you
press [3] or [4], recording will take place in stereo
on tracks 3 and 4.
However if you want to mix the sound from the
L-channel and R-channel of the input and record
it on track 1, press TRACK [1] once again from
the state in which tracks 1 and 2 are selected.
Track 1 will be selected as the recording
destination. You can use the same operation to
specify a different track as the recording
destination.
In some cases you may wish to adjust the
parameters of two tracks simultaneously, such as
when you're using two tracks to record or play
back a stereo source.
You can do this using the Stereo Link function.
Enabling/disabling stereo link
1. Press one of the [TR1]–[TR4] buttons.
2. Use CURSOR [ ][ ] to select the
parameter for which you want to enable
(or disable) stereo link.
3. Simultaneously press [TR1] and [TR2] or
[TR3] and [TR4].
The indication “=” is shown for parameters
that are stereo-linked.
fig.Disp-TR1-V1.eps
When you use VALUE [-] [+] to modify the
value of a track parameter that is stereo-
linked, the two values will change together.
Selecting the track to record Controlling the parameters of
two tracks simultaneously
(Stereo Link)
• The value will not change immediately when
you enable stereo link. Stereo-linked
operation begins when you modify the value.
• If you establish a stereo link between tracks
whose values are different, both values will
be set to the larger value when you modify
the parameter value.
• Simply selecting stereo tracks for recording
does not turn Stereo Link on. When you
select stereo tracks for recording (two REC
indications are shown) and then finish
recording, Stereo Link will automatically be
enabled for those tracks.
• The pan parameter changes as shown below
when Stereo Link is on.
L50 R50 L50 R50 L50 R50
(default)
VALUE [-] VALUE [+]
MICRO-BR_e1.book 41 ページ ２００６年８月１日 火曜日 午後１２時６分