Roland BOSS DIGITAL RECORDER MICRO BR - Manual (Page 36)

36
Using the MP3 player
Remove the central sound of the playback (e.g.,
vocals or guitar solos). This is helpful if you want
to practice playing along with the backing
instruments.
1.
Press [MP3/TRAINER] to switch to
MP3 mode.
The MP3 player screen will appear.
fig.Disp-mp3-mode.eps
2.
Use CURSOR [ ][ ] to move the
cursor to the file number, and use
VALUE [-][+] to select the file number
that you want to play.
3.
Use CURSOR [ ][ ] to make the
display indicate “CENTER CANCEL.”
fig.Disp-mp3-mode.eps
4.
Press [TR1] to turn on the Center
Cancel function.
Each time you press [TR1], the setting will
alternate between “ON” and “OFF”.
5.
Press .
Sounds that are heard from the center (such
as vocals and guitar solos) will be
eliminated.
Slowly turn the VOLUME dial to adjust the
volume.
The guitar etc. are connected, and it is
possible to play while listening the MP3/
WAV file.
6.
If you want to eliminate a sound that
is located in a position other than the
center, Press [TR4] (EDT).
The CenterAdjst screen will appear.
fig.Disp-CENTER-ADJ.eps
7.
Use VALUE [-][+] to adjust.
8.
When you finished MP3 mode, press
[MP3/TRAINER] again.
Canceling the center sound
(Center Cancel)
1 8 5 4 6
3 2
4
2 7
• Depending on the recorded audio, it may
not be possible to completely eliminate the
center sound.
• If you want to eliminate a sound that is
located in a position other than the center,
you can adjust the CenterAdjst parameter.
• If you want to boost the bass sound (low
frequency range), adjust the Low Boost
parameter (p. 93).
• The playback sound will be monaural when
the Center Cancel function is on.
MICRO-BR_e1.book 36 ページ ２００６年８月１日 火曜日 午後１２時６分