Russound UNO-TS2 - Manual (Page 13)

The Features button on the Options screen
brings up a variety of room setting options.
Turn On Volume - This sets the room’s default
volume when the room is turned on.
Party Mode - When in “PARTY MODE” the sys-
tem is primarily controlled by a “MASTER” Keypad.
Party Mode links all rooms to the same source
which is selected by the Master Keypad room. Any
keypad in the system can become a Master
Keypad (if enabled) but only one Master Keypad
may exist at a time in Party Mode.
Volume level changes at the Master Keypad will be
reflected in all rooms in Party Mode. Non-Master
zones in Party Mode can temporarily override
Master Keypad volume level adjustments for their
particular room preference. Master Keypad will not
change Bass, Treble, or Loudness adjustments for
any other rooms other than the Master Keypad
room. Every other keypad will still operate its
respective bass, treble, balance and loudness
adjustments for that room.
Do Not Disturb - Do Not Disturb means do not
disturb this room and selected source. This stops
an “All Off" or Party Mode command from affecting
this room. When another UNO Systems Keypad
selects the same source, a DND icon will appear
alerting the user the source is in Do Not Disturb
mode.
USER GUIDE
Setting Room Preferences
The Options button on the home screen brings
up a variety of room and screen setting options
and touchscreen adjustments.
CAV front A/V - This button selects as a
source the component connected to the CAV6.6
front A/V connection.
Features, Sound Control and Screen Setup -
These buttons bring up additional screens and
are discussed below.
Options Screen
Options screen (when Options is
selected from the home screen)
Options
Features Screen
Features screen (when Features is
selected from the Options screen)
Stream 3
Party Mode Off
13