Ricoh G700SE - Manual (Page 26)


Transferring a Memo List File
to the Camera
Memo list files can be transferred to the camera
from the List Editor or using a card reader.
The List Editor
1.
Start the List Editor and connect
the camera.
After starting the List Editor, connect the
camera as described on P.6. Exit DL-10 if
it starts when the camera is connected
(GP.9).
2.
Transfer the memo list file.
Click the [ Transfer to Camera] icon in
the toolbar or select [Transfer to Camera]
in the [Tools] menu. If a memory card is
inserted in the camera, the file will be
transferred to the [TEMPLATE] folder on
the memory card; otherwise, it will be
transferred to the [TEMPLATE] folder in
internal memory.
The file will only be transferred if the
destination device contains a [TEMPLATE]
folder. If the destination is a memory
card, be sure it has been formatted in the
camera.
3.
Click [OK].
4.
Exit the List Editor.
Select [Exit] from the [File] menu or click
the close box [×] at the top right corner of
the List Editor window.
5.
Disconnect the camera.
Remove the camera from the system and
disconnect the USB cable as described
on P.9 (note that if the connection is not
terminated normally, the memo list file
may not be transferred to the camera). The
memo list will be available for use when
the camera is turned on.
Card Readers
A card reader can be used to copy a memo list
file directly to the camera from the computer.
Copy the file to the [TEMPLATE] folder on the
memory card. A [TEMPLATE] folder is created
automatically when a card is formatted in the
camera.
Deleting Memo List Files From
Memory Cards
To prevent memos from being added to
photographs, use a computer to delete all
“*.mta” files from the [TEMPLATE] folder on
the memory card or in the camera’s internal
memory. Memo list files can not be deleted
by formatting the memory card or internal
memory using the format option in the camera
setup menu.