Ricoh G700SE - Manual (Page 5)


Downloading Images
There are two methods for downloading
images from the camera to your computer.
1. Downloading images without using
image download software such as
DL‑10 (GP.6).
The camera is recognized by the computer
as a separate drive and appears on [My
Computer]. Select and copy images.
2. Use image downloading software such
as DL‑10 to download all images to the
computer (GP.7).
To use DL-10, DC Software must be installed.
For information on how to install
DC Software, see the “Camera User Guide”.
• Do not turn off the camera or disconnect the
USB cable during image transfer. The files will
not be written correctly.
• Do not use the computer to format the SD
memory card or the internal memory. Use the
camera to format the SD memory card or the
internal memory.
• Be sure to stop the connection before
removing the USB cable.
• The camera can not display pictures that
have been transferred to the computer using
“Windows Photo Gallery” (Windows Vista) or
“Windows Live Photo Gallery” (Windows 7) and
then copied from the computer to a memory
card which is subsequently inserted in the
camera.
• Only one Ricoh digital camera can be
connected to one computer. Do not connect
multiple Ricoh cameras to one computer at the
same time.
• The names for DC Software items differ from
the names for Caplio Software items provided
with previous models as shown below.
Caplio Software DC Software
RICOH Gate La DL-10
Caplio Viewer DU-10
Caplio Server SR-10
Caplio Setting ST-10
• When downloading images from your camera,
load a battery with adequate remaining power
in the camera.
• If there is an SD memory card in the camera,
images will be loaded from the card. If there is
no SD memory card in the camera, images will
be loaded from the internal memory on the
camera.
• The software included in the CD-ROM can only
be used with Windows.