Radio Shack Wireless Remote Control System - Manual (Page 14)

14
Lamp Dimmer Modules (Cat. No. 61-2682) — These
modules are designed to control lamps, and you can dim
the connected lamps from a Plug ’N Power controller.
You can connect incandescent lamps of up to 300 watts
to these modules.
Lamp Dimmer Modules respond to the ALL LIGHTS ON
command. Use the module only for incandescent lamps.
Some devices might be damaged by the use of the dim-
mer circuit (even if you don't dim the module). Do not use
this module with lights that have built-in dimmers.
Wall Switch Modules (Cat. No. 61-
2683C) — These modules replace
an existing wall switch. You can
control incandescent lighting of up
to 500 watts with one of these mod-
ules, and you can also manually
control the lights. Wall Switch Mod-
ules also respond to the ALL
LIGHTS ON command.
61-2576.fm Page 14 Wednesday, September 8, 1999 1:50 PM