Radio Shack Wireless Remote Control System - Manual (Page 18)

18
Follow the procedure in “Controlling Additional Modules”
to test each receiver module. See “Intercom Systems” on
Page 28 if your system does not work properly.
CONTROLLING ADDITIONAL
MODULES
1. Set the remote control's slide switch to the group of 8
modules you want to control ( 1–8 or 9–16 ). For exam-
ple, if you set the switch to 1–8 , the buttons on the
remote control will control modules set to 1 through
8.
Notes:
• Button 1 can also turn the receiver module on or
off.
• One side of the supplied label has numbers for
modules 1 through 8 printed on it, and the other
side has numbers for modules 9 through 16. Use
the side of the label that matches your installation.
2. Install additional Plug ’N Power modules (sold sepa-
rately) as desired, following the instructions included
with them.
61-2576.fm Page 18 Wednesday, September 8, 1999 1:50 PM