Rangemaster CLASSIC 110 GAS FSD - Manual (Page 19)

19
Dear Installer
Before you start your installation, please complete the details BELOW.
If your customer has a problem relating to your installation they will be able to contact you easily.
Thank you
Installer’s Name
Installer’s Company
Installer’s Telephone number
You will need the following equipment to complete the cooker
installation satisfactorily
STABILITY BRACKET
If the cooker is to be
supplied with gas through
a flexible hose, a stability
bracket or chain must be
fitted.
These are not supplied
by with the cooker but are
available at most builders
merchants.
GAS PRESSURE TESTER
It is important the gas
pressure is set correctly
FLEXIBLE GAS HOSE
IMPORTANT
Flexible hose must be
suitable for 70°C rise when
the supply connection is
above 610mm from the
floor.For LPG, a suitable
hose for the gas type and
pressure must be used.
A hose is not supplied
with the cooker.
MULTIMETER
(for electrical checks)
Make sure the installation
is electrically safe.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit & Rawlplugs
(only required if fitting the cooker on a stone
or concrete floor)
3. Steel tape measure
4. Cross head screwdriver
5. Flat head screwdriver
6. Spirit level
7. Pencil
8. Adjustable spanner
9. Screws for fitting stability bracket