Radio Shack Kameleon 4-in-One - Manual (Page 7)

O WNER ’ S M ANUAL
Adjusting Brightness 7
D EVICE T ABLE
NOTE: Please refer to the table below when
performing the instructions in “Programming
Device Control” on page 7.
After programming, the RadioShack 4-in-
One Remote will be able to control the
following types of devices:
ADJUSTING BRIGHTNESS
The RadioShack 4-in-One Remote has five
levels of brightness adjustment and is set to
the middle one at the factory. To increase or
decrease the brightness, perform the
following steps:
1. Press and hold P until the IR segment
flashes twice.
2. Using the number keys, press 9 7 4. The
IR segment flashes twice.
• To increase brightness, press CH+
one or more times.
• To decrease brightness, press CH-
one or more times.
3. When the desired brightness is achieved,
press P again to exit programming.
NOTE: The remote includes a tilt switch
that turns on the display when the unit is
moved. If desired, you can disable this
feature. See “Setting the Tilt Switch” on
page 12.
PROGRAMMING A DEVICE
The RadioShack 4-in-One Remote is preset at
the factory to operate the following devices:
• RCA Satellite Box
• RCA TV, VCR, and DVD Player
To control devices other than the default
brands, perform the following steps;
otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or
DVD player) and, if applicable, insert
media (e.g., cassette or disc).
NOTE: Please read steps 2 through 5
completely before proceeding. Before
starting step 2, review the
“Manufacturer’s Codes (Códigos del
Fabricante)” (starting on page 43).
Brands are listed alphabetically in order
of most popular ones first. Highlight or
write down the devices and the codes you
wish to program.
2. Press a device key (i.e., VCR, TV, CBL/SAT,
or DVD). The selected device key will
animate.
NOTE: Please refer to the “Device Table”
on page 7 when choosing a device key for
programming.
3. Press and hold P until the IR segment
flashes twice.
NOTE: If the display turns off due to
inactivity, the remote control will exit
programming and return to the last-
selected device menu screen. To start
programming again, repeat this step.
DEVICE KEY CONTROLS THESE DEVICES
VCR or DVR/PVR
Television, TV/VCR
Combo, TV/VCR/DVD
Combo, or TV/DVD
Combo
Cable Box (Converter),
Satellite Receiver, or
Satellite/PVR Combo
DVD Player, DVD/VCR
Player Combo, or Home-
Theater-in-a-Box (HTiB)
Device
RS 4in1 Kam User Manual.fm Page 7 Friday, March 4, 2005 9:09 AM