Roland MC-09 - Manual (Page 47)

47
Applying an effect
5
Use the [INC] and [DEC] buttons to specify the length for
effect control (1 or 2 measures).
The display will indicate the effect control length.
6
Press the [SCALE] button to specify the step unit and number
of steps.
16th notes x16 steps: indicator dark
8th note triplets x12 steps: indicator lit
7
Press the [EXIT] button.
You will return to Step Edit mode.
8
Press a step [1]–[16] button to select the step whose value you
will input.
If you want to input the same value for several steps, hold down one of the
step buttons and then press the button(s) for the other step(s).
9
Turn the C3 knob to input the value.
10
Repeat steps 8 and 9 to make effect control settings.
11
When you are finished making effect control settings, press the
[EXIT] or [
] button.
* The effect control settings you make are temporary. If you want to keep your effect
control settings, you must save them (p. 48).
If the effect control length
is set to 2 measures, you
can change the measure
position by pressing the
[SCALE] button to make
the display show the
measure number, and then
pressing the [INC] or
[DEC] button. To check the
current measure location,
press and hold the [SCALE]
button. The previous
display will reappear when
you release the button.