Roland MC-09 - Manual (Page 70)

70
Parameter list
EFFECTS
Filter
Modifies the brightness of the sound.
Isolator
This is an equalizer that drastically cuts the sound, producing a unique effect by cutting the volume of a specific
frequency range.
Phaser
Adds a phase-shifted sound to the original sound, creating modulation and producing a sense of rotation and
depth.
Slicer
Repeatedly cuts the sound, giving a conventional sound the character of a rhythmic backing phrase
* Note value: 16th note, 8th note, quarter note, half note, whole note, whole note x 2, whole note x 4
Parameter Range Controller Parameter function
Rate 0–127,
note value* C1 knob Specifies the speed of modulation.
If set to a note value, the modulation speed will synchronize to the tempo.
Cutoff frequency 0–127 C2 knob Specifies the frequency (cutoff frequency) at which the filter will begin to take
effect
Resonance 0–127 C3 knob Emphasizes the region near the cutoff frequency
Effect type F-1–F-8 [INC]/[DEC]
(DISPLAY =
TONE/TYPE) Selects the effect type
Parameter Range Controller Parameter function
Low gain 0–127 C1 knob Specifies the volume of the lower range
Middle gain 0–127 C2 knob Specifies the volume of the midrange
High gain 0–127 C3 knob Specifies the volume of the upper range
Effect type I-1–I-7 [INC]/[DEC]
(DISPLAY =
TONE/TYPE) Selects the effect type
Parameter Range Controller Parameter function
Rate 0–127,
note value* C1 knob Specifies the speed of modulation.
If a note value is specified, the modulation speed will synchronize to the tempo.
Depth 0–127 C2 knob Specifies the depth of modulation
Resonance 0–127 C3 knob Emphasizes the region near the center frequency
Effect type P-1–P-8 [INC]/[DEC]
(DISPLAY =
TONE/TYPE) Selects the effect type
Parameter Range Controller Parameter function
Rate 0–127,
note value* C1 knob Specifies the cutting speed.
If this is set to a note value, the cutting speed will synchronize to the tempo.
Gate time 0–127 C2 knob Specifies the note length to cut
Pan L64–cnt–R63 C3 knob Specifies the panning of the sound that is cut
Effect type S-1–S-7 [INC]/[DEC]
(DISPLAY =
TONE/TYPE) Selects the effect type