Roland MC-09 - Manual (Page 69)

69
Parameter list
LEAD
BASS
RHYTHM
* Note value: 16th note, 8th note, quarter note, half note, whole note, whole note x 2, whole note x 4
Parameter Range Controller Parameter function
Overdrive/
Distortion OSC tune -1–1 (oct) C1 knob Adjusts the pitch of the oscillator
Drive 0–127 C2 knob Specifies the degree of distortion
Tone -64–63 C3 knob Adjusts the brightness of the sound
Phaser
Rate 0–127 (PH1/3),
note value*
(PH2/4) C1 knob Specifies the speed of modulation (PH1/3).
Specifies the modulation speed as a note value (PH2/4).
Depth 0–127 C2 knob Specifies the depth of modulation
Resonance 0–127 C3 knob Adds character to the sound
Slicer+Ring
Modulator
Rate 0–127 (SL1),
note value* (SL2) C1 knob Specifies the cutting speed (SL1).
Specifies the cutting speed as a note value (SL2)
Gate time 0–127 C2 knob Specifies the note length that will be cut
Ring frequency 0–127 C3 knob Adjusts the frequency of the internal oscillator
Common
Cutoff
frequency 0–127 CUTOFF
knob Specifies the frequency (cutoff frequency) at which the filter will be-
gin to take effect
Resonance 0–127 RESO knob Emphasizes the region near the cutoff frequency
Filter envelope
decay time 0–127 DECAY knob Decay time over which the cutoff frequency changes from the maxi-
mum value to a stable level
Tone Refer to
“Sound List”(p.
76) [INC]/[DEC]
buttons
(DISPLAY =
TONE/TYPE) Selects a tone
Parameter Range Controller Parameter function
OSC tune -64–63 C1 knob Adjusts the pitch of the oscillator
* When vintage mode is on, the range of this value will change
Filter envelope
depth 0–127 C2 knob Specifies the depth of the filter envelope
Accent 0–127 C3 knob Emphasizes the sound
Cutoff frequency 0–127 CUTOFF knob Specifies the frequency (cutoff frequency) at which the filter will be-
gin to take effect
Resonance 0–127 RESO knob Emphasizes the region near the cutoff frequency
Filter envelope
decay time 0–127 DECAY knob The decay time over which the cutoff frequency changes from the
maximum value to a stable level
Tone Refer to
“Sound List”(p. 76) [INC]/[DEC] buttons
(DISPLAY = TONE/
TYPE) Selects a tone
Parameter Range Controller Parameter function
Bass drum level 0–127 CUTOFF knob Specifies the volume of the bass drum
Snare drum level 0–127 RESO knob Specifies the volume of the snare drum
Hi-hat level 0–127 DECAY knob Specifies the volume of the hi-hat
Rhythm set Refer to
“Sound List”(p. 76) [INC]/[DEC] buttons
(DISPLAY = TONE/
TYPE) Selects a rhythm set