Raritan Computer MCIP18 - Manual (Page 16)

8 M ASTER C ONSOLE IP U SER G UIDE
a. To turn Security ON/OFF (default is OFF): Press the З / И keys to toggle.
b. To change Security activation delay time (default is 15 minutes). Move to the Time Out
field, then type a number from 01 to 99, or use the З / И keys to specify a time interval.
If the system will remains inactive (no keyboard or mouse operation) for this time
interval, the next user is required to enter a password to access the MasterConsole IP.
c. To change the Administration Password: Move to Change Passwords, where Admin will
be highlighted. Press the Enter key and type a new password (up to eight alphanumeric
characters, no spaces). Press Enter. Confirm the password by retyping it. Press Enter.
d. To change a User Password, press the Tab key to highlight the desired User# field. Press
Enter. Type a new password (up to eight alphanumeric characters, no spaces). Press
Enter. Confirm the password by typing it again. Press Enter. Repeat this process for the
remaining four Users, pressing the Tab key to move from one User field to the next. You
can specify up to five User Passwords.
e. To change the type of keyboard, press the Tab key to highlight Language Mode field.
Press З / И to select English, German, or French.
4. To exit the Administration Menu, press a Function key on your keyboard to access a different
menu, as displayed along the bottom of the menu screen. Press Esc to exit the OSUI and
return to normal computer operation.
Using the On-Screen User Interface (OSUI)
Selecting a Computer
1. Activate the OSUI by pressing the Hot Key three times rapidly. To switch the channel you
are viewing, press [Left CTRL] two times, then press N, where N is the channel number you
want to see. The Selection Menu appears.
Figure 8 Selection Menu (One-Tier, sorted by Channel ID)
2. Channels are listed either numerically by Channel ID or alphabetically by Name (default:
sort numerically by Channel ID). Press F12 to toggle between numerical and alphabetical
sorting.
3. The Selection Menu displays a maximum of eight channels at a time.
a. The Status column shows each channel's activity and Channel-Specific Scan Rate. A "+"
in the first column indicates a device is connected and powered ON, while a blank
indicates the device is powered OFF or there is no device connected. "Snn" indicates the
Channel-Specific Scan Rate of nn seconds. (default is 3 seconds).