Unit reset, Figure 43 unit reset screen, Figure 44 unit reset confirmation screen – Raritan Computer MCIP18 User Manual
Page 57
C
HAPTER
4:
R
EMOTE
M
ANAGEMENT AND
O
PERATION
49
Unit Reset
Figure 43 Unit Reset Screen
The unit reset panels allow you to reset specific parts of the MCIP unit, including keyboard and
mouse, the video engine, and the MCIP itself.
You must reset the MCIP card to activate newly updated firmware. Resetting the card closes all
current connections to the administration console and to the Remote Console and lasts 30-60
seconds. Resetting sub-devices takes only a few seconds and does not close any connections.
To reset any of the displayed devices, click Reset.
If you choose to reset the MCIP Device, MCIP confirms your choice.
Figure 44 Unit Reset Confirmation Screen
Click Really Reset to reset the MCIP card.
Note: The Reset hole in the rear panel does not reset but restart the unit.