Install lens motor, Pre l iminar y – Runco QUANTUM COLOR Q-750I User Manual
Page 38
Advertising
22
Q-750i Series Installation/Operation Manual
PRE
L
IMINAR
Y
Figure 3-7. Q750i with Ceiling Mount Adapters/Projector Stands
Install Lens Motor:
1.
Position the AutoScope Lens Motor as shown in Figure 3-8.
2.
Line up the mounting holes on the lens motor housing with those on the underside of
the projector.
DO NOT OVER-TIGHTEN THE SCREWS.
Caution
Advertising