Runco QUANTUM COLOR Q-750I - Manual (Page 51)

Installation
Q-750i Series Installation/Operation Manual 35
PRE
L
IMINAR
Y
3.9
Changing the OSD
Language When you turn on the Q-750i for the first time, the OSD Language Menu appears.
The Q-750i can display the menus in English, French, German, Italian, Spanish, Swedish,
Portuguese or Russian.
Press or to select a language. Then, press ENTER to confirm your selection.
3.10
Adjusting the Picture
Orientation If the Q-750i is installed behind the screen, you must change the picture orientation to
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
Rear Projection If the projector is used in a rear-projection application (see Figure 3-5), press repeatedly
to select Rear Projection from the System Menu. Press or to set it to On.
Ceiling Mode If the projector is ceiling-mounted, the Q-750i automatically inverts the image. If this
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.