Rockford Fosgate 500.2 - Manual (Page 20)

– 17 –
• RCA inputs are connected to both left and right channels
• Signal Input Switch selected to Unbalanced for RCA input
• Left Phase Switch set to 0
°
• Right Phase Switch set to 180
°
for stereo/mono operation
• All speaker polarity on right channel is inverted to correct for signal phase
• Gain for left and right channels set equally to balance the subwoofer
• Impedance for each channel should be 2
Ω
minimum
• Impedance for bridged channel should be 4
Ω
minimum
• XCard is in Full Range position
• Passive crossovers are needed for proper stereo/mono operation
• RCA inputs are connected to both left and right channels
• Signal Input Switch selected to Unbalanced for RCA input
• Left Phase Switch set to 0
°
• Right Phase Switch set to 0
°
• Gain for left and right channels operate independently
• Impedance for each channel should be 2
Ω
minimum
• XCard can be High-Pass, Low-Pass or Full Range position
Stereo/Mono Operation
Stereo Operation
I
N
S
T
A
L
L
A
T
I
O
N
® ®
180 ° - 0 °
Phase
0 – 180 °
Unbalanced
Balanced
L
(Mono)
RCA
Input
R
Gain
Pass Thru
R
Gain Balanced
Input L
L
Bass
EQ
EZ Bridged Pass Thru
R
–
+ +
–
2 Ω Min. 2 Ω Min.
Speaker
– R +
Speaker
+ L –
L
(Mono)
180 ° - 0 °
Phase
0 – 180 °
Unbalanced
Balanced
–
+
RCA
Input
+
–
4
Ω
min.
+ –
+
Speaker
Terminal
–
Speaker
Terminal
2 Ω min. 2 Ω min.
R
Gain
Pass Thru
R
Gain Balanced
Input L
L
Bass
EQ
EZ Bridged Pass Thru
R
Speaker
+ L –
Speaker
– R +