RayTek 3i - Manual (Page 40)

2.6.2 Analog Output
The analog output is made up of the following:
• Output: 1 mV/° (°C or °F) for all models except 1M
1 mV/°C or 0.5 mV/°F for the 1M
• Output impedance: 1.3 K
9
Use the signal output jack accessory.
The analog output represents the current temperature of the object being measured,
regardless of the mode used. If T
amb
compensation is activated, the analog output
will be representative of the compensated temperature values.
2-28 Raynger 3i Series Operator’s Manual