Rangemaster U110120 - 01A - Manual (Page 9)

7
ArtNo 600-0053 - BILF - cabinet dimensions
600
600 max
820-870
Positioning Your Appliance
IMPortant: We recommend that two people install this
appliance.
Choosing the Right Location
The appliance should be installed in a location where
the ambient temperature corresponds with the climate
classification as stated on the rating plate.
Your appliance may not function correctly if the ambient
temperature falls outside of the following ranges.
climate
classification
appropriate ambient
temperature
SN +10 to +32 °C
N +16 to +32 °C
Avoid exposing the appliance to direct sunlight and sources
of heat (such as radiators, heaters or cookers).
Make sure the appliance is installed with the correct
ventilation requirements. Restricting ventilation can increase
the energy consumption by 15%.
The door should be able to open completely and freely.
Locate the appliance so you can easily access the food that is
stored in it.
Make sure there is an electrical socket available which will be
accessible after your appliance is installed.
fig.4-1 shows the minimum opening requirements.
If this appliance is situated in a cold environment (such as
a shed, outhouse or garage) it will affect its performance.
You may find that the performance of the appliance is
not consistent and this may damage foods. a consistent
ambient temperature of 10 °c or above is recommended.
Reversing the Door
As supplied, the appliance door opens from the left. The door
can be reversed so that it opens from the right.

this procedure MUst be completed before the
furniture door is attached.
When reversing the door, keep any parts that you remove
from the appliance for later use.

take care when opening the hinges, they are sprung
loaded and there is the risk of injury if they close on
your hand.
Tools required:
•
Phillips screwdriver
• Flat bladed screwdriver
4. Installation
fig.4-1
All dimensions in mm.