Runco SP-42 - Manual (Page 35)

Installation
Runco CinemaWall SP Series Owner’s Operating Manual 25
PRE
L
IMINAR
Y
RS-232 Controller
Connection Use a 9-pin, straight-through RS-232 cable to connect a PC or home theater
control/automation system (if present) to the RS-232 port (located next to INPUT 5) on the
CinemaWall; see Figure 3-13.
For more information about using this connection, refer to Serial Communications on
page 53.
Figure 3-13. RS-232 Control System Connection
2
3
5
XMT DATA RCV DATA
SIG GND
3
2
5
RCV DATA XMT DATA
NO CONNECTION
1, 4, 6, 7, 8, 9 1, 4, 6, 7, 8, 9
SIG GND
To/From
PC or
Control
System
CinemaWall
DB-9 Male DB-9 Female
RS-232 DVI VIDEO