Runco SP-42 - Manual (Page 59)

Operation
Runco CinemaWall SP Series Owner’s Operating Manual 49
PRE
L
IMINAR
Y
4.9
Enlarging One Part of
the Screen The CinemaWall allows you to zoom in on a portion of the displayed image. To use this
feature, press the MAGNIFY button repeatedly to select one of four zoom levels
(Normal Size, 1.5x, 2x or 3x); see Figure 4-9. When using the zoom feature, a small
subscreen appears in the upper-right corner of the display.
Use the directional buttons ( / / / ) to select a magnified image area to display. As
you do this, a green plus sign (+) appears in the subscreen to indicate the center of the
enlarged area.
Figure 4-9. Viewing an Enlarged Area of the Display
1. You cannot change the aspect ratio while using the MAGNIFY
function.
2. The MAGNIFY function is cancelled if the input signal changes,
or if you switch inputs or select PIP mode.
Magnification Level 1 (Normal Size) Magnification Level 3 (2x)
Zoom-Area subscreen
+
Note