Runco SP-42 - Manual (Page 66)

Serial Communications
56 Runco CinemaWall SP Series Owner’s Operating Manual
P
RELI
M
INARY
MSTS02 4D 53 54 53 30 32 – – Sets 2-screen operation to PinP (lower
right).
MSTS03 4D 53 54 53 30 33 – – Sets 2-screen operation to PinP (upper
right).
MSTS04 4D 53 54 53 30 34 – – Sets 2-screen operation to PinP (upper
left).
MSTS05 4D 53 54 53 30 35 – – Sets 2-screen operation to PinP (lower
left).
MSTS06 4D 53 54 53 30 36 – – Sets 2-screen operation to PoutP
(side-by-side; small sub-screen on left).
MSTS08 4D 53 54 53 30 38 – – Swaps main and sub-screens in PIP
2-screen mode.
MSTS09 4D 53 54 53 30 39 – – Sets 2-screen operation to PoutP
(side-by-side; small sub-screen on
right).
MSTS10 4D 53 54 53 31 30 – – Sets 2-screen operation to 2 SCREEN
(side-by-side, full height; main screen
on left).
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.