Ricoh SP3510SF - Manual (Page 179)

Item Setting Description
Original
(Type 2 model only)
Required
Select the sides of the original (1 side or 2-sides) to
scan according to the page and binding orientation.
Note that if 2-sided scanning is specified, you must use
the ARDF (scanning will not be possible with the
exposure glass).
Scan Size Optional
Select the scanning size for the original from A5, B5,
A4, Executive, Half Letter, Letter, Legal, or custom size.
If you select custom size, select [mm] or [Inch], and
then specify the width and length.
Resolution Optional
Select the scan resolution from 100Ч100, 150Ч150,
200Ч200, 300Ч300, 400Ч400, or 600×600 dpi.
Density Optional
Specify the image density by clicking the right or left
buttons.
is the lightest, and
is the darkest.
Scan to FTP Settings
Item Setting Description
Quick Dial Number Optional
Select when setting the destination as a Quick Dial
entry.
Name Required
Name of the destination. The name specified here will
be shown on the screen when selecting a scan
destination. Can contain up to 16 characters.
Registering Scan Destinations
177