Ricoh SP3510SF - Manual (Page 407)

Message Causes Solutions
Network is not Ready
A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
On Hook or Stop key
The machine has been off-hook
for an extended period of time. Put down the handset or press the [Clear/
Stop] key.
Out of Paper: X
The indicated tray has run out of
paper. Load paper to the indicated tray. See p.96
"Loading Paper".
Please Restart
Machine The machine needs to be
restarted. Turn off the power, and then turn it back
on.
Print Cart. Set Error
The print cartridge has not been
installed or has not been
installed correctly.
Reinstall the print cartridge. See p.409
"Replacing the Print Cartridge".
Remove Paper:
Bypass Tray
The machine failed to proceed
with the print job, because tray
1 or tray 2 was specified as the
input tray but paper was set in
the bypass tray.
Remove paper from the bypass tray.
Replace Required
Soon:
Print Cartridge
The print cartridge is almost
empty.
Prepare a new print cartridge.
Replacement
Required:
Fusing Unit
The fusing unit is no longer
usable, and must be replaced. Contact your sales or service
representative.
Replacement
Required:
Paper Feed Roller
The paper feed roller is no
longer usable, and must be
replaced.
Contact your sales or service
representative.
Replacement
Required:
Print Cartridge
The machine has run out of
toner. Replace the print cartridge. See p.409
"Replacing the Print Cartridge".
Error and Status Messages on the Screen
405