Ricoh SP3510SF User Manual
Page 349
IP Policy Settings
Item
Description
No.
Specify a number between 1 and 10 for the IPsec policy. The number you
specify will determine the position of the policy in the IPsec Policy List. Policy
searching is performed according to the order of the list. If the number you
specify is already assigned to another policy, the policy you are
configuring will take the number of the earlier policy, and the earlier policy
and any subsequent policies will be renumbered accordingly.
Activity
Select whether to enable or disable the policy.
Name
Enter the name of the policy. Can contain up to 16 characters.
Address Type
Select IPv4 or IPv6 as the type of IP address to be used in IPsec
communication.
Local Address
Displays the IP address of this printer.
Remote Address
Enter the IPv4 or IPv6 address of the device with which to communicate.
Can contain up to 39 characters.
Prefix Length
Enter the prefix length of the Remote Address, using a value between 1 and
128. If this setting is left blank, "32" (IPv4) or "128" (IPv6) will be
automatically selected.
Configuring the IPsec Settings
347