Ricoh SP3510SF - Manual (Page 345)

Item Description
Authentication Select whether or not to perform authentication when the machine connects
to the LDAP server.
• [Inactive]: Anonymous (no authentication)
• [Active]: Cleartext authentication
• [High Security]: CRAM-MD5 authentication
If [Active] or [High Security] is selected, you must also set [Login Name
Attribute], [User Name (Optional)], and [Password (Optional)].
Login Name Attribute Specify the user name prefix or login name attribute of Bind DN, such as
“uid” or “cn”, according to the LDAP server. Can contain up to 16
characters.
If [Authentication] is [Active] or [High Security], you cannot leave this setting
blank.
User Name (Optional) Enter the user name to log in to the LDAP server. Can contain up to 128
characters.
If [Authentication] is [Active] or [High Security], you cannot leave this setting
blank.
Password (Optional) Enter the password to log in to the LDAP server. Can contain up to 128
characters.
If [Authentication] is [Active] or [High Security], you cannot leave this setting
blank.
Japanese Character
Code Set (Required) Select the character code the LDAP server uses.
Connection Test Click [Start] to see whether or not connection to the LDAP server is possible
using the settings made.
Search Conditions
Item Description
Identification Name
(Required) Enter an attribute type by which the user name can be distinguished. Can
contain up to 16 characters.
Email Address
(Required) Enter an attribute type by which the user e-mail address can be
distinguished. Can contain up to 16 characters.
Fax Number (Required) Enter an attribute type by which the user fax number can be distinguished.
Can contain up to 32 characters.
Configuring the LDAP Server Settings
343