Using favorite channel scan – Radio Shack Audio/ Video Remote Control User Manual

Page 14

Advertising
background image

Need help? Call 1-888-284-8735

14

USING FAVORITE CHANNEL
SCAN

You can program your 6-in-One Remote to scan
through 10 of your favorite channels in either TV,
VCR, or Cable modes.

Note: You can only maintain a favorite channel list
for one device at a time. You cannot set up a favorite
channel list for another device until you clear the ex-
isting list.

1. Press the device key for the device you want to

scan (

TV

,

VCR

, or

CBL

). The red light blinks.

2. Hold down

P

until the red light blinks twice, then

press

9 9 6

.

3. Enter the first channel number you want to

include in your favorite channel list, then press

P

.

Notes:

• Precede a single-digit number with a

0

. For

example,

0 1

,

0 2

, and so on.

• If you enter a three-digit number, you do not

need to press

P

after entering the number.

• If you use an ENTER key to directly access

channels on your original remote, press

ENTER

after you enter the last digit of a chan-

nel.

4. Repeat Step 3 for up to 9 other channels you

want to include in your list, then hold down

P

until the red light blinks twice.

5. To scan through your favorite channel list, press

the appropriate device key, point the remote at
your device, then press

SCAN

. The remote con-

trol repeatedly scans through the favorite chan-

15-1994.fm Page 14 Tuesday, February 29, 2000 2:04 PM

Advertising