Radio Shack Audio/ Video Remote Control - Manual (Page 4)

Need help? Call 1-888-284-8735
4
A LOOK AT YOUR REMOTE
Your RadioShack 6-in-One Smart A/V Remote Con-
trol was designed with the functions used most often
to operate your TV, VCR, cable converter, CD or
DVD player, satellite receiver, and audio equipment.
Key Function
P Used in setting up your devices.
Used to activate light mode.
POWER,
MENU, GUIDE,
SELECT,
MUTE, LAST,
VOL +, VOL–,
DISPLAY, CH
+, CH –, digit
keys, TV/
VIDEO, ENTER Operate the same as the correspond-
ing keys on your original remote con-
trol.
AUX 1, AUX 2,
VCR, TV, CD,
CBL/SAT Used when you set up the remote
control to replace your original remote
controls. Also used during normal
operation to let you select the device
you want to control.
All Lights On
(POWER),
PLUG ’N
POWER,
All Off (MUTE),
Brt (VOL+),
Dim (VOL–),
On (CH+),
Off (CH–) Allows you to control lamps and appli-
ances with your 6-in-One A/V Remote
Control. To get the full benefit from
this feature, you must purchase addi-
tional equipment, available at your
local RadioShack store.
SLEEP Controls the Sleep Timer in TV,
CABLE, SAT, and AUX 1 or AUX 2
modes for devices that have this fea-
ture. If your device does not have a
sleep timer, SLEEP activates the
remote’s built-in sleep timer.
15-1994.fm Page 4 Tuesday, February 29, 2000 2:04 PM