Back panel – RocketFish RF-RBWSO2 User Manual
Page 8
Advertising
8
Back panel
#
Feature
Description
1
External antenna
Receives signals from external senders. Sends signals to external receivers.
2
DC IN jack
Plug the AC adapter into this jack.
3
AUDIO IN/OUT jacks
When used as a sender, plug an external audio source into the AUDIO IN jack.
When used as a receiver, plug your speaker system into the AUDIO OUT jack. Please note, this
device operates as either a sender and/or receiver, so you can use it simultaneously to send and
receive on your Rocketboost network.
4
HUB STATUS switch
Enables/disables hub mode operation. Please see the “Establishing communication” section on
page 21 for more information.
1
2
3
4
1
RF-RBWS02_09-0535_MAN_ENG_V1.fm Page 8 Thursday, August 27, 2009 7:39 PM
Advertising