Ricoh GigE Vision VGA Monochrome CCD Camera FV-G200B1 User Manual
Page 34
34/38
FV-G200B1
User’s Guide Rev. 1.02
Command No.
Command Description
50H: [7..0]
51H: [15..8]
[Y_offset for AOI]
Initial data: 0, data range: 2 ≤ “Y_offset + Height” ≤ 1,236
Sets the Y_offset (the vertical start position of the image for the AOI)
52H: [7..0]
53H: [15..8]
[Height for AOI]
Initial data: 1,236, data range: 2 ≤ “Y_offset + Height” ≤ 1,236
Sets the height (the vertical size of the image for the AOI)
54H: [7..0]
55H: [15..8]
[X_offset for AOI]
Initial data: 0, data range: 8 ≤ “Y_offset + Height” ≤ 1,624
Sets the X_offset (the horizontal start position of the image for the AOI)
56H: [7..0]
57H: [15..8]
[Width for AOI]
Initial data: 1,624, data range: 8 ≤ “Y_offset + Height” ≤ 1,624
Sets the width (the horizontal size of the image for the AOI)
60H: [7..0]
[Camera mode 1] Initial data: 00H
Sets the white balance area ON/OFF and the gamma table ON/OFF.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D5:
No function
Always set at “000”
D4:
White balance area ON/OFF
0: OFF (Full screen)
1: ON (setup area)
D3 to D1:
No function
Always set as “000”
D0:
Gamma table ON/OFF
0: OFF (Gamma=1.0)
1: ON
92H: [7..0]
[Iris lens manual adjustment] Initial data: 01H
Sets the iris lens manual adjustment operation.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D2:
No function
Always set as “000000”
D1 to D0:
Manual adjustment operation
00: Hold
01: Open
10: Close
11: No Function (Prohibited setting. Do not set this value)