Safety – Rhinotek RHINO FL20 User Manual

Page 15

Advertising
background image

Safety Section 1-9

© 2004 Alamo Group Inc.

SAFETY

FL20M/FL14M 10/03

SAFETY

DANGER!

There are obvious and hidden potential hazards in the operation of this
Implement as in all power-driven or pulled equipment. REMEMBER!
This machine is often operated in rough terrain conditions that include tall
grass, weeds, gullies, holes, slopes, hidden obstructions and the like.
Serious injury or even death may occur unless care is taken to assure the
safety of the operator and bystanders in the area. Do not operate this
machine with anyone in the immediate area.

(S3PT-7)

WARNING!

The rotating parts of this machine continue to rotate even after the PTO
has been turned off. The operator should remain in his seat for 60
seconds after the brake has been set, the PTO disengaged, the tractor
turned off, and all evidence of rotation has ceased.

(3PT-10)

“Wait a minute...Save a life!”

CAUTION!

To prevent tipping of implement when stored in folded position, use
carrying wheels or adequate stands on center frame.

(S3PT-6)

WARNING!

Use extreme care when lowering or unfolding the implement’s wings. Make
sure no bystanders are close by or underneath the wings. Allow ample
clearance around the implement when folding or unfolding the wings. Use
extreme caution around buildings or overhead power lines.

(S3PT-5)

DANGER!

Make sure the PTO shield, integral driveline shields, and input shields are
is installed when using PTO-driven equipment. Always replace any
shield if it is damaged or missing.

(S3PT-8)

WARNING!

Relieve hydraulic pressure prior to doing any maintenance or repair work
on the Implement. Place the Implement on the ground or securely
blocked up, disengage the PTO, and turn off the tractor engine. Push
and pull the Remote Cylinder lever in and out several times prior to
starting any maintenance or repair work.

(S3PT-9)

Advertising