Rimage Everest III - Manual (Page 19)

Operate the Everest printer
110875_A 13
Setting the printable area (PC)
This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm
media. This allows you to set the outer and inner diameters to print the disc label without
overlapping the disc edges.

Note: Printable area settings created within a CD Designer label file will override the printer
and fax settings on Windows.
#
Tip: Most discs like the one
shown above have the
following printable areas:
Outer Diameter 118 mm
Inner Diameter 24 mm
#
one
areas:
Standa
eter 38 mm
H
Inner Diameter 24 mm
Tip: Most discs like the
shown above have the
following printable
rd Area
Outer Diameter 118 mm
Inner Diam
ub Area
Outer Diameter 35 mm
4. Navigate to printing preferences. Refer to page 10.
5. Select the Advanced tab.
6. View or change the printing preferences.
a. To modify the printable area, select Modify. The
Printable Area Settings window opens.
b. In the Standard Area settings, enter:
• The desired outer diameter
• The desired inner diameter
c. To print on a disc with a stacking ring, select the
radio button labeled Advanced.
d. In the Hub Area settings, enter:
• The desired outer diameter
• The desired inner diameter
e. To apply the settings, select OK.
Or
To close the window without applying the settings, select
Cancel
.
7. When you have made the desired choices, select Apply.
8. To close the Printing Preferences window, select OK.